Union Process S-100

SOLD AS OF 7/21/06Perry #6515 avail. conf. 5/12/05AEC less 15% 1/29/02 - L. Jacobs would take $10k$11500 to $12000 will check motorAEC #2766 - same machine3/10/05 - cust #17514 - Please email us the grinding tank thickness if you will have the data.We are on heavy duty milling. Tank thickness is a considerable factor. (3/25 - to vendor) 3/28- per vendor - Do you want the thickness of the ss only or overall thickness with jacket and sheathing? 3/30 - email to vendor - thickness of the SS only 2/2/05 - cust #17514 - (to vendor 2/14/05) 1. length ( up to the flange ) and diameter of center shaft.2. length and diameter of agitator arms.3. internal dimension of the grinding tank.2/3/05 - cust #17514 - (to vendor 2/15/05) We would also like to know the thickness of the grinding vessel wall ( inside wall ) if possible.Are the walls of the grinding vessel still ok ? We are concerned if it is similar to item 3348W. Since we will be doing heavy duty grinding work.* s/n - unknown - * jacket tested - ok* machine test ran - ok* no name plate2/15/05 - per vendor - (to cust 3/10/05) - 40 x 2-1/2 diameter shaft - 1-1/4 diameter x 14-3/4 long spokes - tank 35-1/2 diameter x 31 deep MIKE RICCHINI - ATTRITOR DOES NOT APPEAR TO BE TAPERED.~~~~~~~~~~~~~~~~~motor tag - gearbox tag - ~~~~~~~~~~~~~~~~~~MOBILE - 724-244-5364*** 10/6 - DENNIS GENNARO - PRE-FORM SPECIALTIES - ATTRITOR #3027 - 724-459-0808.setharnoldaec: Dennis Genero 724-459-0808 - cust #19219 - RE: #3027 - needs to confirm availability serial # does it have a tapered bowl? wide at top & tapers down