Chicago Boiler KDL PILOT

SOLDINGALLS #1756 - Avail. conf. 2/11/11$7250 less 15% (2/11/11) 2/25/10 - TONY DOWD - JonDoes the unit come with a starter motor and on/off switch. not obvious in the photos.- NO STARTER NO ON/OFF. JonHere are a few pictures. The inside chamber looks very good. I also sent you a link to the manufacturer’s site.The belt and pulleys look good. This was running black ink. There is still a small amount of ink residue left on it. We cleaned the end plate and the inside of the chamber pretty good. The oring gasket on the end plate looks good. <<...>> <<...>> <<...>> <<...>> <<...>> <<...>> <<...>> <<...>> <<...>> <<...>> <<...>> <<...>> <<...>> <<...>> <<...>> <<...>>http://www.cbmills.com/brochurefiles/MultiLabBrochure.pdf-----Original Message-----From: Jon Arnold [mailto:jon@arnoldeqp.com]Sent: Tuesday February 23 2010 1:01 PMTo: Dick IngallsSubject: Your #1756 -1.4 LITER DYNO MILL HORIZONTAL MEDIA MILL - S/S - 5 HPMy customer wants to know:Dear JonThank you for your response.For the Dyno Mill can you advise the following;1: is it in working condition? IT SEEMS TO BE. I THINK WE COULD BUMP THE MOTOR TO TEST IT IF WE HAD AN ORDER PENDING.2: Does it have all the parts? IT SEEMS TO HAVE ALL THE PARTS THOU SINCE WE HAVE NEVER RUN IT WE WOULD NOT KNOW FOR SURE3: What pellets / balls are included if any? IT DID NOT COME IN WITH ANY MEDIA HOWEVER WE GOT SOME EXTRA MEDIA FROM AN INK PLANT WHICH WE COULD INCLUDE. WE DO NOT KNOW WHAT THE MATERIAL OF THE MEDIA IS. IT WAS MADE BY SAINT GOBAIN. AND WAS FOR A HORIZONTAL MEDIA MILL.4: Do you know the throughput range in litres per hour THE RATED CAPACITY FOR THESE MILLS IS 1.1 – 8.8 GALLONS PER HOUR(11- 88LBS PER HOUR). THAT IS FOR CB LAB MILLS WITH CHAMBERS RUNNING FROM .3 LITERS TO 1.6 LITERS. SINCE THIS IS A 1.6 LITER UNIT I WOULD THINK THE CAPACITY WOULD BE AT TH UPPER LIMIT OF THE RATED CAPACITY.RATED CAPACITY IN LITERS IS 4.125 TO 33.3 LITERS PER HOUR.I would like some close-up pictures if possible of the chamber agitatorseals motor belts etc.