Luwa LN-0100
Sold
Description
SOLD AS OF 2/5/07Federal # 24707 (avail. conf. 11/6/06) $35000 less 15%Cleveland OH11/28/06 - a condenser is just a shell and tube heat exchanger. Fractionation is done in the evaporator. The evaporator drives off the lower boiling point materials (evaporates) and the higher boiling point material stays liquid and keeps moving through the system. The condenser simply cools the evaporate so it can be pumped through the rest of the system. (sent to cust by JMA 11/29/06) 11/28/06 - Thank you for the prompt response. Do you know if the condensor is a FRACTIONATING CONDENSOR?My customer mentioned that since there are multiple openings on the evaporator he ASSUMES that the condensor is a fractionating type please confirm.11/28/06 - Per vendor - It includes a 80 sq. ft condenser. The system would be a full load. There are two tanks the evaporator the condenser and some structural steel.3/24/06 - WINGER - I WILL LOWER THE PRICE BY $5000.00 IF ONLY THE EVAPORATOR IS TAKEN$30000 LESS 15%* tell customers we would give $2500.00 off for evaporator alone.3/24/06 - Jon Any chance you would sell just the evaporator and not the feed tank recovery tank and condenser? If so what would the price be?Please advise.ThanksChris Tucker LUWA 1 10.8 ONE (1) Used Luwa Thin-Film Evaporator System Model LN-0100 10.8 sq. ft. surface area 316L stainless steel construction rated full vacuum internal at 650 degrees F stainless steel jacket rated 165 PSI at 650 degrees F with standard N style rotor mechanical seal 5 H.P. 230/460 volt XP motor with 1 product inlet 3 product outlets 8vapor outlets system complete with 80 sq.ft. shell and tubeall stainless steel condensor 400 gallon stainless steel reciever and 800 gallon stainless steel feed tank mounted on common framework Serial No. 0100/36 National Board No. 106.
Specifications
Manufacturer | Luwa |
Model | LN-0100 |
Condition | Used |
Serial Number | 0100/36 |
Stock Number | 5290 |
Machine id | 5390 |
Machine description | 10.8 SQ. FT. LUWA THIN FILM EVAPORATOR - T-316L S/S |
Machine code | 04H |
Equipped with | 1 - used 10.8 sq. ft. Luwa Thin Film Evaporator. Model LN-0100. T-316L stainless steel construction. Rated full vacuum internal at 650 deg. F. Stainless steel jacket rated 165 PSI at 650 degrees F. With standard N-style rotor. Mechanical seal. 5 HP 230/460 volt XP motor. 1 in. product inlet 3 in. product outlets 8 in vapor outlets. System complete with 80 sq.ft. shell and tube all stainless steel condensor 400 gallon stainless steel reciever and 800 gallon stainless steel feed tank. Mounted on common framework. F.O.B. - LOCATION |
Status | S |
Subcategory sort | 10.8 |