1997 Littleford/Day FM 130 D

Newcomer Products - Exclusive agreement signed with AEC on 9/2/05 (good for 60 days)$11000 to Newcomer Products4/12/06 - chris collesel of shepherd color wants to know:prior use?is it suitable for internal vacuum??can the littleford pull a vacuum?prior use?not drying but blending material - tungsten carbide powder with parrafin- they never pulled vacuum- would heat (low pressure steam in the jacket) first then use chilled water to cool downed called mfg - they did say although there is no vacuum rating fm 130s have been run at 15 in. with no problem in the littleford lab.- some seals might start leaking- no internal pressureLaTrobe PAJON ADVISED ED NEMETH THAT AARON WOULD HAVE TO BUY IT FROM US.HE SAID OK (AND REF. TO THE AGREEMENT WHICH GOES OVER THIS)8/12/05 - AARON IS LISTING IT FOR $47000!!! SERIOUSLY!!!!!Littleford Plow Mixer Model FM-130-D Total vessel capacity 4.6 cubic feet stainless steel contact surfaces. Jacket rated 75 psi ASME at 320 deg F. 10 hp 440 volt inverter duty main motor. Year 1997.The Mixer was purchased new in May of 1997 with a 6-8 week delivery. We received the unit in July of 1997 but did not operate till April of 1998. The Serial number is 20609-4942. The phone number of LittlefordDay is (606) 525-7600.The mixer has a thermocouple port on the backside of the mixer with a temperature indicator.The mixer also includes one lance type liquid injector for liquid addition.The mixer has one contour plugged opening with mounting flange to facilitate addition of chopper system in the future.The drive motor is a 10 HP Class I Group D Division 1 single speed motor rated for 460 volt 3 phase 60 Hertz input power.The unit also includes an optional pushbutton station and control panel containing starter equipment overload protection and reduced voltage transformer. Controls are NEMA 7 rated for 460 volts 3 phase 60 Hertz input power. Control circuit is 115 volts. Pushbutton station is located on the front side of the mixer and the control panel is mounted on the side of the unit.Also the mixer includes the option of an inverter duty drive motor.In addition we also purchased in September of 1998 a set of Vee-Shaped plows with head scrapers with leading edges Hard-faced.The unit was disconnected and removed from production about a year and a half ago. However the mixer was only operated for about a year and a half before we changed our process. After that we ran it intermittently for special purposes. Otherwise it sat idle.Asking Price $15000.RegardsEdward M. Nemeth P.E.Newcomer Products Inc.P.O. Box 272Latrobe PA 15650Phone: (724) 694-8100 ext.140Fax: (724) 694-8620