Littleford FKM 1200
Sold
Description
SOLD AS OF 10/15/08Hallmark #4829 - avail. conf. 10/15/08A.E.C. PRICE $38500.00 LESS 15% (less 10% on quote from 5/13/04)MAKE SURE EG SALES IS COMPENSATED5/30 - per vendor - No sure what you mean the Motors are wired. No we haven't check them but would prior to shipment.5/28 - The serial number is 1317. I am also investigating the lack of wiring to the motor choppers and a confirmation of last use and/or field test. (to vendor 5/29)5/28 - I am trying to find an electrical print for this mixer. Wondered if you can e-mail me the serial number so I can correspond with Littleford also noticed no wiring to chopper motors these have been field tested?5/20/08 - per vendor -yes the control panel/starter included.Chopper motors connected to one box.Photos attached. - info and photos sent to customer 5/205/20 - cust #29711 - working with Muelstein re: purch purchase of #2967 & #6389.For #2967 - needs additional photos of starter and needs to know how choppers are started - individually or all together? * Ron will take $25000 net to him 5/1/08Tom King at Muherlstein prelim offer of $31867.00 Counte to Tom at $32500.005/14/04 - Jon:Don;t know the exact food plant the unit was last used but it was definity used in FOOD. Other then the discharge is missing its ready to be used. Any further questions please contact Jim Birkey as I will be out of the office for a few days. His direct e-mail is jimheiusa.com. Ron Wilson Hallmark Equipment
Specifications
Manufacturer | Littleford |
Model | FKM 1200 |
Condition | Used |
Serial Number | 1317.0 |
Stock Number | 2967 |
Machine id | 2967 |
Machine description | LITTLEFORD MODEL FKM 1200 MIXER - S/S - WITH CHOPPERS |
Machine code | 05G |
Equipped with | 1 - used Littleford Model FKM 1200 Plow Mixer. 25 HP drive 2 Falk shaft mounted gear reducer. With (4) 5 HP choppers and (2) side doors. Mounted on stand. Welded plows. T304 stainless steel contact parts. 15 in. dia. discharge door (missing) with 8 in. x 10 in. gate. 17 3/4 in. center infeed port (1) 10 in. dia. infeed port on each end. 31 in. dia. x 97 in. long. Machine has been test run and is in good working condition. It can be powered up during an inspection if so desired. Last used in a food application. Requires a discharge valve. F.O.B. - LOCATION |
Status | S |
Subcategory sort | 1200.0 |