Liquid Control
Sold
Description
NEOMED - GEORGE COLEMAN #UNK7/6/05 - GEORGE WANTS TO NET $4000.00 FOR ITVERY GOOD GUY - WILL ALLOW US TO MAKE MONEY6/28/05 - George Coleman: Machine is Pneumatic & Electric. Caution sticker says This machine is equipped with viton O-rings. Use only Chlorinated Solvents6/27/05 Tim Walsh from appli-tec interested-asked if it's pneumatic and what the caution sticker reads on the machine. George Coleman at Neomed is checking and will call back on 6/28/05 Tim ultimately needs a meter-mix machine (spelling?) with a component A and B and material pumped through a tube. he seems near-ready to purchase .*Machine is Pneumatic & Electric. * Caution sticker says This machine is equipped with Viton O-rings. Use only Chlorinated Solvents #2429 - liquid control - 7/29/03 - still availabledo you have a manual for the machine?- believe we do will check.continuous (until tanks empty)? or individual shots?- can be run continuously- tanks are gravity feedmotorized mix head?- runs on compressed air- 110V component & air (we believe)size of the tanks?- approx. 1 gal. each.type of pumps? gear pref. by this customer.- air pistons (we believe)- very precise10/31 - cust #19490 questions- Does the TWIN FLOW MINI have a model number of something else I can reference? We would be mixing a silica filled urethane (25000 cps) with a very low viscosity catalyst (250 cps). Mix ratio is 100 to 7.5 by volume and would like to know if this type of mixing equipment will work and would hold up under daily use. (11/5 - forwarded questions to vendor)
Specifications
Manufacturer | Liquid Control |
Condition | Used |
Serial Number | 1513.0 |
Stock Number | 2429 |
Machine id | 2429 |
Machine description | LIQUID CONTROL - TWIN FLOW MINI - 2 COMPONENT MIXER |
Machine code | 05H |
Equipped with | 1 - used Liquid Control 2 component mixer. Twin Flow Mini model. Shot size: 1 cc to 12 cc. Ratio: 1:1 to 15:1. Cycles: 30/min. Machine can be run continuously tanks are gravity feed. Each tank is approx. 1 gal. capacity. 110V power and air required to run machine. (Replacement cost - $17000.00) . F.O.B. - LOCATION |
Status | S |