Hockmeyer HHLII-480

Sold

Description

JLM #B-2660 avail. conf. 8/09/05 AEC PRICE $40000 LESS 15%LOCATION - Rehoboth MA8/26/05 - JIM ARNETTE MADE US AN OFFER OF $25000 AND WOULD WIRE US THE MONEY. JAY OFFENDED BY HIS NUMBER AND IS STICKING TO HIS GUNS. JON TURNED IT OVER TO JLM DIRECTLY. JAY WILL TAKE CARE OF US IF A SALE OCCURS. FOLLOW UP WITH JIM ARNETTE & JAY TO SEE WHAT HAPPENS!!!!JIM ARNETTE SAID ITW MADE AN OFFER OF $25000 ON THAT MACHINE AND IT WAS ACCEPTED. PUZZLING TO JON BECAUSE WE REGISTERED ITW ON THIS PIECE BACK IN SEPTEMBER 2004 AND THEY DID NOT MAKE US AN OFFER??? SOMEONE IS NOT TELLING THE TRUTH!! SINCE JAY WOULD PROBABLY SCREW US ANYWAY MIGHT AS WELL TURN THIS GUY OVER TO HIM SINCE HE INSPECTED IT & MET JAY. HOPEFULLY ALL THE PIECES WILL FALL INTO PLACE.8/25/05 - JIM ARNETTE INSPECTED THE MACHINE ON 8/25/05 - REGISTERD HIM WITH JLM9/23/04 - QUESTIONS FROM JIM SURJAN - 847-350-0193AGE?CONDITION? GOOD CONDITION. WAS RUNNING WHEN REMOVED. LAST USED IN A CAULKING/ADHESIVE FACILITYCLEANED PAINTED & CHECKED OVERCHANGE OUT BEARINGS & SEALS IF NECESSARY? SHAFT WILL BE CHECKED/TURNED BY HAND. IF WOBBLY/PLAY IN THE SHAFT BEARINGS WOULD BE REPLACED. AS FAR AS SEALS. WITH MIXING VESSEL?? YES. ARE THERE 2 MOTORS DRIVING THE 2 BLADES. * (1) or (2) motors* shaft dia. on both shafts. * seals around top of shafts into the dome.Jon 60 hp for the disperser 20 hp for the sweep. We can visually check the seals but we do not check them under pressure. The shaft diameters are 3.25 on both. Regards David Gagnon / J. Little Mercer Co.254 Hornbine Rd. Rehoboth MA 02769800-637-2371/508-679-1901----- Original Message -----

Specifications

ManufacturerHockmeyer
ModelHHLII-480
ConditionUsed
Serial Number90021862.0
Stock Number3905
Machine id3909
Machine description500 GALLON HOCKMEYER 60 HP DUAL ACTION VACUUM MIXER SWEEP AND HIGH SHEAR
Machine code05J
Equipped with1 - used Hockmeyer 60 HP/20 HP Dual Shaft Vacuum Mixer. 550 gallon total/480 gallon working capacity. With sweep and high shear. Model HHLII-480. Stainless steel blades and carbon steel tank with 3 in. bottom side elbow outlet. 59 in. dia. x 48 in. deep tank. 57 1/2 in. wide sweep. 60 HP/XP disperser motor is 3/60/208-230/460V. 20 HP Sweep motor is 3/60/208-230/460V. With approx. 5 HP electric hydraulic motor for lift mechanism (approx. 5 ft. of lift). Shaft diameters are 3 1/4 in. on both. With (2) 15 in. disperser blades (1 with a carbon steel hub). Stainless steel finger baffle. Overall dimensions are 5 ft. x 9 ft. x 10 ft. 2 in. F.O.B. - LOCATION
StatusS
Subcategory sort500.0