Ross 42A-5
Sold
Description
PURCHASED FROM LAKESIDE EQPT ON 10/31/12WE PAID $1500 EA. FOR 2 OF THESE BLENDERSF.O.B. - DETROIT MI - BOUND FOR CLEVELANDprior service - came from a General Motors facilityaccording to mfg literature: 800 lbs. shipping weightapprox. oad: 68 x 37 x roughly 3-4 ft. tall (if that high)http://www.aaronequipment.com/usedequipment/mixers/ribbon-blenders/charlesross-42a5-84530AARON FORMERLY HAD SAME MODEL WITH THE FOLLOWING DESCRIPTION:USED: Ross double spiral ribbon blender model 42A5 5 cubic feet working capacity 7 total 304 stainless steel. Non-jacketed trough 17 wide x 38 long x approx 20 deep. 2 diameter shaft inner ribbon 1-1/2 wide x 1/8 thick outer 1 wide x 1/4 thick welded to 1 diameter posts. 2-1/2 center bottom outlet with air operated valve. (1) Piece clamp down top cover. Driven by a 4 hp 3/60/460 volt 1715 rpm gearmotor ratio 24:1 approx 71 rpm ribbon speed. Mounted on a carbon steel frame with a top mounted stainless steel feed hopper. Built 1998.
Specifications
| Manufacturer | Ross |
| Model | 42A-5 |
| Condition | Used |
| Serial Number | 73326A |
| Stock Number | 7718 |
| Machine id | 7905 |
| Machine description | 5 CU. FT. ROSS RIBBON BLENDER - S/S |
| Machine code | 05M |
| Equipped with | 1 - used 5 cu. ft. Ross Double Ribbon Blender. Model 42A-5. Serial #73326A. 5 cu. ft. working capacity/37 gallons (7 cu. ft. total capacity/52 gallons). Stainless steel construction. Single shaft with double ribbon. Inner ribbon approx. 1 5/8 in. wide outer ribbon approx. 1 in. wide. Approx. 2 in. center bottom discharge with pneumatic valve. Clamp down hinged top cover with (3) 4 in. inlets. Trough measures approx. 17 in. wide x 38 in. long x 20 in. deep. On carbon steel frame with 3.0 kw (4 HP) 3/60/220-240/380-415 & 460 volt 10.3-9.9/6.0-5.7 & 5.1 amp 1435 & 1750 RPM motor to SEW Eurodrive right angle reducer with 24:1 ratio. F.O.B. - CLEVELAND OH |
| Status | S |
| Subcategory sort | 5.0 |