Strong Scott 111.0
Sold
Description
Monon #12998 AVAIL 8/18/14 on webDON & TROY WOULD TAKE $8K NET TO THEM ON 7/21/11$12500 LESS 15%MONON INACCORDING TO DON ON 4/8/11 - FAIR CONDITION OLD HAS BEEN OUTSIDE - WILL PRICE IT PROPERLY. WILL WORK FINE FOR A CHEMICAL CO.- PRIOR USE DONUT DOUGHITEM NUMBER: 12998 MIXERS- RIBBON- CARBON STEEL:111 CU FT STRONG SCOTT RIBBON BLENDER - C/S - 20 HP DRIVEMODEL NUMBER: 111SERIAL NUMBER: 1993 111 CU FT STRONG SCOTT RIBBON BLENDER - CARBON STEEL -INSIDE CHAMBER 10 FT LONG - 45 IN WIDE - 4 FT DEEP -RIBBONS INTER 2 1/2 IN OUTER 1 IN DEEP - SHAFT IS6 IN INSIDE AND 3 1/2 IN AT BEARINGS - CARBON STEELJACKET UP TO 8 IN FROM TOP - BOTTOM CENTER 10 INDIAMETER DISCHARGE - COVER HAS FOUR HINGED LIDSDRIVE: 20 HP 3/60/220/440/ CONNECT TO FALK REDUCER -CHAIN DRIVE -OVERALL: 12 1/2 FT LONG - 5 FT HIGH 4 FT WIDE - SELLING PRICE: AS IS/WHERE IS: $12500.00CRATING: AT COST
Specifications
| Manufacturer | Strong Scott |
| Model | 111.0 |
| Condition | Used |
| Serial Number | 1993.0 |
| Stock Number | 7014 |
| Machine id | 7201 |
| Machine description | 111 CU FT STRONG SCOTT RIBBON BLENDER - C/S - 20 HP |
| Machine code | 05M |
| Equipped with | 1 - used 111 cu. ft. Strong Scott Ribbon Blender. Model 111. Carbon steel construction. Chamber is approx. 10 ft. long x 45 in. wide x 48 in. deep. Ribbons are approx. 2 1/2 in. outer 1 in. deep. Shaft is approx. 6 in. inside and 3 1/2 in. at bearings. Carbon steel jacket is up to 8 in. from top. Center bottom outlet is approx. 10 in. dia. Top cover with four hinged lids. 20 HP 3/60/220/440V motor to Falk reducer. Chain drive. Approx. overall dimensions: 12 ft. 6 in. long x 4 ft. wide x 5 ft. high. F.O.B. - LOCATION |
| Status | S |
| Subcategory sort | 111.0 |