1994 All-Fill SHA-300/CEREBUS II

Sold

Description

ALARD #Z7503 (avail. 5/4/15 on web) $19500 LESS 10% (conf. 2/2/15)ready to run - as per ed shultsWILLIAMSON NY2/2/15 - from Alard web site...Automatic auger filler with MIXER-IN-HOPPER and container indexing THROUGH-CONVEYOR. A single auger filling head with coned infeed hopper with sweep agitator in hopper cover and level sensor positioned over an 8 foot long by 8 inch wide stainless steel framed dual chain through-conveyor with adjustable container side rails and pneumatic stops for automatic container indexing. Left to right container flow from control position. Complete with no-container no-fill photo eye operator control panel with Cerebus II touchpad controls variable speed control on conveyor painted steel support base with stainless steel top plate scissors lift with crank handle for raising /lowering the fill head height. All stainless steel product contact surfaces.208/230/460 volt 3 phase auger drive.Manufacturer literature rates for accurate dispensing of free flow non-free flow and liquid products (with appropriate tooling) by auger revolution count or time with volumetric fill accuracy of +/- 1% for powders liquids creams granular products gels pastes salts spices into containers from 1 inch to 7 inch diameter at speeds ranging from 15 to 60 per minute depending on fill size and product type.Previously used for / came with tooling for filling a cream or paste with 1 inch throw bottom-up-fill cylinder. Other tooling / change parts are available. As of ths writing this All Fill filler is in stock at Alard in VERY good operational condition available for timely shipment.Alard item reference #:Z7503* max. container width - approx. 8 in. (1/2 in between chains overall width of chains 1 1/4 in.)NAME:gary lalondeCOMPANY:get saucedADDRESS:9620-58 aveCITY:edmontonSTATE:ABZIP:t6e6c1COUNTRY:canadaPHONE:780-462 2418EMAIL:sales@cgetsauced.comCOMMENTS:I am interested in ALL FILL MODEL SHA-300/CEREBUS II AUGER FILLER WITH CONVEYOR (Item 6797) What is age? 1994.Warranty? - 2 week right of return privilegeWhere is it located - williamson ny- side by side dual chain conveyor approx. ALL-FILL MFG. MODEL SHA-300/ CEREBUS II SINGLE HEAD AUTOMATIC AUGER FILLER WITH THRU CONVEYOR. 8' long stainless steel framed dual chain through- conveyor with adjustable container side rails and pneumatic stops for automatic container indexing. Auger filling head with coned infeed hopper with cover and level sensor. Left to right container flow from control position. Touch pad controls. Painted steel support base with stainless steel top plate. All stainless steel product contact surfaces. 208/230/460 volt 3 phase auger drive. Variable speed conveyor drive. In VERY good condition ready for timely shipment. You may view a picture of this machine at http://www.alard-equipment.com on our general listings page under F for FILLER. Ref. #:Z7503 Price: $19500 Less 10% FOB Williamson NY

Specifications

ManufacturerAll-Fill
ModelSHA-300/CEREBUS II
Year1994
ConditionUsed
Stock Number6797
Machine id6984
Machine descriptionALL FILL MODEL SHA-300/CEREBUS II AUGER FILLER WITH CONVEYOR
Machine code06D
Equipped with1 - used All-Fill model SHA-300 Filler with Cerebus II controls and through conveyor. Single auger filling head with coned infeed hopper with sweep agitator. Cover and level sensor positioned over an 8 foot long by 8 inch wide stainless steel framed dual chain through-conveyor with adjustable container side rails and pneumatic stops for automatic container indexing. Left to right container flow from control position. With no-container no-fill photo eye. Operator control panel with Cerebus II touchpad controls. Variable speed control on conveyor. Painted steel support base with stainless steel top plate. Scissors lift with crank handle for raising /lowering the fill head height. All stainless steel product contact surfaces. Electrically set up for 3/60/208-230/460 volt power. According to manufacturer's literature rates for accurate dispensing of free flow non-free flow and liquid products (with appropriate tooling) by auger revolution count or time. With volumetric fill accuracy of +/- 1% for powders liquids creams granular products gels pastes salts spices into containers from 1 inch to 7 inch diameter at speeds ranging from 15 to 60 per minute depending on fill size and product type. Previously used for / came with tooling for filling a cream or paste. With 1 inch throw bottom-up-fill cylinder. Other tooling / change parts are available. Unit is in good mechanical condition and is ready for immediate shipment. F.O.B. - LOCATION
StatusS
Subcategory sort0.131001