500 GALLON STAINLESS STEEL JACKETED VACUUM MIX TANKS

Medford # ??? (bought 2 more from toothpaste plant)AEC $7500 less 15%PATTERSON NJSAME AS #4248 BUT NEWER & NICER.Jon - These are photos of # 334-1 and 334-2. Tom Riley of DuPont looked closely at 334-1 and said that he didn't have to check 334-2 as closely.I think he was going to recommend 334-1.Price is $ 7500 each less 15 % to Arnold loaded to drop deck at Paterson NJ Good hunting Joe HE OWNS WITH CHARLES ATKINSON.9/10 - Cust 21505 questions - What is maximum internal vacuum Maximum IPM? - can it be hydrostatically tested - does it have controls for mixer - confirm in clean condition. Maximum overall height - Outside diameter manufacturted by Casale Industries9/10 - response to cust - 1. When built these were vacuum tested at 27 in. Jackets were hydrotested at 30 PSI2. Machines are missing nameplates however both were oprating when taken out of service 4-5 months ago. 3. The location were these pieces are does not have facilities for hydrotesting however the owner will guarantee that the jackets do no leak as he is certain that they were operating at full volume. The packing glands might need to be redone. 4. These pieces DO NOT have controls for mixer - the motor is gearhead 3 hp 1750 rpm - with a 2 stage Boston gear reducer 100-1 reduction and then the output shaft of the gear reducer has a bubble gear (pinion gear) - that goes up to a large double gear on the agitator shaft. That provides another 4-1 reduction - turns very slow - 5-6 rpm 5. Outside diameter of jacket is just under 62 in - overall dimensions a little more including legs. Overall height is 9 ft. 6 in. 6 .The bottom outlet flange is a 6 in. flange - there is a reducting flange on there - reduced to 1.5-2 in.