Cherry Burrell 1500.0

REGAL #9166-TK 8500 LESS 10%will deal on price!!(HE PAID $2200)JA TALKED TO TERRANCE at REGALCLEARANCE - 39 FROM LIP OF DISCHARGE TO FLOOR.WALL THICKNESS APPEARS TO BE 1/16 OF AN INCH.1/22/04 - GUNNAR at Southern Lithoplate Inc. ASKS - Inventory #3700 what is the distance from the floor to the bottom of the tank and is it pressure rated?&Inventory #3700 also need to know the thickness of the stainless also I am authorized by my boss to tell you that if we purchase the tank we will provide the truck to haul it to our location provided it is loaded. Any questions you have for me contact below. thanksGunnar LarsonSouthern Lithoplate Inc.Ph. 919-556-9400 ext 236Fax 919-556-1977 4/1/04 - Ed Lockel wants to know overall height - 281-235-8645 (4/12 - inq to vendor)GENERAL QUESTIONS1. What's the wall thickness? PROBABLY 1/16 BUT WE WILL CONFIRM TOMORROW2. 304 or 316 S/S? 316 S/S (LAST USED FOR TOMATO BASED PRODUCT - HIGH ACID)3. Are the shaft and blades in S/S as well? YES4.There are openings on the top end. What's the diameter for each of those? Opening 1 to 8 see next page (plus others not seen). SEE THE FOLLOWING5. What's the maximum pressure the tank can tolerate?N/A - NOT A PRESSURE VESSEL NO PRESSURE RATINGS ON THIS TANK. WE ARE SELLING IT AS AN ATMOSPHERIC TANK NOT A PRESSURE NOR VACUUM TANK6. What's the maximum vacuum the tank can tolerate?N/A - NOT A PRESSURE VESSEL NO PRESSURE RATINGS ON THIS TANK. WE ARE SELLING IT AS AN ATMOSPHERIC TANK NOT A PRESSURE NOR VACUUM TANK7. What's the finish quality on the inside on the tank? HIGH POLISH (MIRROR FINISH)8. We would replace the existing drive by a 10 HP drive with a total weight of about 400 lbs. Do you foresee any problems by doing so? WE DONT ANTICIPATE ANY PROBLEMS9. What's the height of the dish bottom? 810. What's the height of the dome top? 811. What are the outside dimensions of the tank including leg but EXCLUDING the drive? 13'6 (WITH LEGS WITHOUT DRIVE)OPENINGS1) 1 ¾ I.D.2) 2 ¾ I.D.3) 2 ¾ I.D.4) 2 ¾ I.D.5) 2 ¾ I.D.6) 2 ¾ I.D.7) 2 3/48) 18 I.D.OTHER OPENINGS NOT SEEN: C.B.O. (CENTER BOTTOM OUTLET) - 5 ¾BOTTOM SIDEWALL - APPROX. 4 FROM BOTTOM ON SIDE WALL THERE IS 2 ¾ I.D. OUTLET* THERE IS A SQUARE PATCH APPROX. 6 X 7 ON THE BOTTOM. NOWHERE NEAR THE OUTLET. IT IS SMOOTHED OUT ON THE INSIDE BUT THE OUTSIDE IT IS NOT PERFECT UGLY PATCH DOES NOT AFFECT THE INTERNAL INTEGRITY OF THE TANK. -----Original Message-----From: Luc-Antoine Marcoux Sent: Tuesday May 04 2004 9:19 AMTo: Jon Arnold (E-mail)Subject: Importance: HighGood morningThank you very much for your quick reply. Can you please consider the attached file and return to me with the information requested.Best regardsLuc-Antoine Marcoux <>