1982 Lee Industries 2700U9MS

SOLD AS OF 6/25/07H & P #AK 4149 avail. conf.4/27/07AEC Price: $12500 less 15%Montville NJ5/2/07 - Cust #28053 - What is the overall height? Approx 9 ft. 6 in.The top is flat - what kind of bridge for drive system does it have? See attached photosIs there a hinged cover which opens? YesIs the top bolted or welded on? Bolted -See attached photosIs there a bottom drain? YesHow deep are the scratches on the inside? Can you feel them by hand? These are markings from the Teflon - they are not very deep - according to our partner on this piece the inside is smooth. What you see in the pictures is a little of the product residue on the walls of the tank.Are only the sides jacketed? Both the sides and bottom are jacketed What openings are on the top? The top has center opening for agitator drive (1)- 16 in. and (1)- approx. 20 in. opening.Are photos of the top available? Photos are attached to this emailIs the exterior a Stainless Steel sheathing? YesIs the jacket made of stainless steel or carbon steel? We do not know it is under the sheathing3/5/07 - cust #27385 - What is the jacket thickness? The Jacket is underneath insulation and stainless steel housing and we are unable to measure the jacket thickness; however the jacket will be pressure tested with an order. Is the mixer included? No - there is a shaft that is still in the unit but the mixer is not includedHow many legs does it have? - The legs have been removed but there are four sockets where the legs used to be. 3/9/06 - per vendor - Here are more pics.Unit was originally in cosmetics service. The markings inside are from the nylon blades that were on the agitator that used to be on the unit.Unit has dished bottom. Unit has full jacket. Pics should answer cust question about internal polish. ( to cust 3/10/06) 3/1/06 - cust #10217 (Dave Bobeck-Shepard) Does it have a polished inside? Does it have a dish bottom? Does it have a full Jacket? Are photos available showing appearance of top and interior? (to vendor 3/9/06)